YAROVIT motor vehicles are manufactured by Russian company ZAO YAROVIT MOTORS located in St. Petersburg.

YAROVIT motor vehicles are heavy-duty multiaxle trucks for transportation of various cargoes in tricky road conditions and severe environment. YAROVIT motor vehicles have excellent drawbar and speed performance and load characteristics; can travel both on access roads of open pits and cross country. Dimensions and ecological parameters of YAROVIT motor vehicles are fully compatible with the requirements to the vehicles traveling on public roads.

The specific features of YAROVIT trucks, as compared with "highway" trucks, include a higher load-bearing capacity (over 25 t), increased drawbar performance and cross-country capacity. As compared with open-pit dump trucks, YAROVIT dump trucks from the point of view of dimensions and ecological standards are fit for traveling public roads, have higher speed performance and besides are more cost-effective in operation.

The technical policy of YAROVIT MOTORS Company assumes fitting their motor trucks only with such systems, blocks and units whose quality corresponds to the highest world standards. The high-quality blocks and units of domestic and foreign make used in YAROVIT motor vehicles ensure their superior performance standards on a par with the best European vehicles of the same class.

Optimum variants of the units and blocks arrangement, compatibility of their technical characteristics, a reasonable compromise between the vehicle quality and its user value have given YAROVIT dump trucks competitive edge in the form of high efficiency, quality, reliability, and rational price, below that of the foreign-manufactured vehicles of the similar class.

Efficiency of the motor trucks is based on the modern scientific approach to the design and assembly of the vehicles, producing the optimum variants of components configuration and combination of their technical characteristics. The high efficiency of the vehicles covers the increased requirements to such their parameters as carrying capacity, cross-country capacity, maneuvering ability, reliability and long operating life, operating economy, availability of aftersales service and repairs. The high carrying capacity means increased load-bearing ability ensured by a number of engineering decisions:

–    heavy-duty drive axles suitable for the most harsh operating conditions;

–    increased strength of the rigid framework;

–    high power-to-weight ratio;

–    consistency of action of transmission and engine units.

The excellent cross-country capacity and maneuvering ability are the result of the multiple-variant arrangement of the transmission, efficient differential blocking system, the central tire inflation system, and unconventional structure of steerable axles.

In the course of the pilot tests at the sites of Norilskiy Nikel (Norilsk) and Fosforit (Kingisepp) YAROVIT dump trucks confirmed their outstanding performance parameters.

Lineup of YAROVIT motor vehicles

Unlike most European manufacturers taking chassis with minimum number of driving axles as the base model for multiaxle model of dump trucks, the base models for YAROVIT motor vehicles are all-wheel-drive varieties. In this regard the options here go "from the complex to the simple", i.e. the base models are the most complex ones: 10x8, 8x8 and 6x6, and further development of the lineup is accomplished by graduals simplification of the above base models.

The lineup of ZAO YAROVIT MOTORS comprises dump trucks with wheel arrangement 10x8, 10x6, 10x4, 8x8, 8x6, 8x4, and 6x6, ensuring the required load-bearing parameters, cross-country capacity and possibility to use a wide variety of superstructures. Different vehicles are created on the available chassis: dump trucks, truck tractors, drilling rigs, concrete-mixing machines, etc.

Variants of superstructure of YAROVIT lineup

Outside appearance

Motor vehicle type

Possible wheel arrangement

Note

Chassis for various superstructures used in mining, oil and gas, and other industries

10х8

Load carrying capacity— 32,5…48,8 t

Double-tire or single wheel

10х6

8x8

8х6

8х4

6х6

Truck tractor

8x8

Admissible load on the fifth wheel: up to 36 t.

Gross train weight: 90…110 t.

Double-tire or single wheel

8х6

8х4

6х6

Dump truck 

10х8

Carrying capacity: 28,3…42,7 t.

Double-tire wheel

10х6

8x8

8х6

8х4

6х6

Concrete –mixing machine

10х6

Payload volume of the mixing drum: 12…15 м3.

Double-tire wheel

8x6

8х4

8х4

6х6

Oil and gas well drilling and servicing rig

8x8

Admissible hook load:

100…160 тонн.

Double-tire wheel

8х6

8х4

6х6


YAROVIT dump trucks

YAROVIT dump trucks of GLOROS family are intended for transportation of bulk cargo in various industries (ore, coal, coke, rock mass, earth, sand, crushed stone, etc.).

The wide spectrum of models of GLOROS dump trucks offered to the consumers, make it easy to select the optimum variant for transportation of cargo with different density and in different operating conditions.

Dump truck make

Wheel arrangement

Main engineering data

Notes

Dump truck GLOROS A7803D

10х8

Gross vehicle weight: 64 t;

Carrying capacity:  up to 42.7 t;

Body volume: 25.3 cub.m;

Engine: Deutz BF 6M 1015C;

Gearbox: ZF 16 S 2520 TO Ecosplit

Подробнее о самосвале GLOROS A7803D

Dump truck GLOROS A5504D

8х8

Gross vehicle weight: 54 t;

Carrying capacity: up to 35.5 t;

Body volume: 21.2; 26.1; 31; 36 cub.m;

Engine: Deutz TCD 2015 V06 Euro 3

(Cummins ISM 420 30);

Gearbox: ZF 16 S 221 TO Ecosplit

Подробнее о самосвале GLOROS A5504D

Dump truck GLOROS A5404D

8х6

Gross vehicle weight: 54 t;

Carrying capacity: up to 35.6 t;

Body volume: 21.2; 26.1; 31; 36 cub.m;

Engine: Deutz TCD 2015 V06 Euro 3

(Cummins ISM 420 30);

Gearbox: ZF 16 S 2520 TO Ecosplit

Подробнее о самосвале GLOROS A5404D

Dump truck GLOROS A5304D

8х4

Gross vehicle weight: 54 t;

Carrying capacity: up to 36.2 t;

Body volume: 21.2; 26.1; 31; 36 cub.m;

Engine: Deutz TCD 2015 V06 Euro 3

(Cummins ISM 420 30);

Gearbox: ZF 16 S 2520 TO Ecosplit 

Подробнее о самосвале GLOROS A5304D

Dump truck GLOROS A3204D

6х6

Gross vehicle weight: 44 t;

Carrying capacity: up to 28.3 t;

Body volume: 16.8 cub.m;

Engine: Deutz TCD 2015 V06 Euro 3;

Gearbox: ZF 16 S 2520 TO Ecosplit

Подробнее о самосвале GLOROS A3204D

YAROVIT motor vehicles have engines of the world leading manufacturers, DEUTZ и CUMMINS. Engines of various versions are installed into the trucks at option, regardless of the superstructure type. The power-transmission plant, also at option, may be fitted with prestart liquid heat transfer heaters of Thermo 90S type (manufactured by Webasto). Heaters manufactured by other companies may also be used.

YAROVIT motor vehicles are equipped with mechanical 16-speed transmissions manufactured by ZF Friedrichshafen, transfer cases by ZF Steyr. or by YAROVIT MOTORS.

Depending on the function, YAROVIT motor vehicles have axles by SISU Axles or Axletech International. The admissible load is 10 t on leading axles, and 13 t on through and rearmost axles. Rearmost axles with bearing capacity 16 t may be installed at option, thus increasing the load-carrying capacity of the trucks. The Locking interaxle and cross-axle differentials have electropneumatic control.

YAROVIT motor vehicles have rigid, strong and light-weight frames of an original design. The frame consists of two constant depth channel sidemembers connected by cross-members. The points of the frame exposed to maximum stresses are reinforced. The sidemembers are supplied by the leader of European framework manufacturers, the French branch of Thyssen Krupp Prisma S.A.S. High-tensile cold-proof steel Domex used for the frame was developed by SSAB Tunnplat specially for structures under high load operating in climatic extremes.

Well matched front and rear leaf suspensions of YAROVIT motor vehicles ensure comfortable driving on the roads with poor road pavement and during cross-country travels, without loosing the high load-carrying capacity of the trucks. In order to enhance safety against overturning the vehicle suspensions are fitted with antiroll bars.

An original double circuit steering system used in YAROVIT motor vehicles, is manufactured by ZF Lenksysteme. This system ensures the steering response from chassis in the event of a failure of some elements of the steering system (pumps, valves, etc.),, loss of pressure in one of the hydraulic circuits of the system, engine trouble while moving, and when towing chassis with the engine off. The high reliability and efficiency of the steering system are the result of the dual redundancy of the system elements (pumps, cylinders, valves) and of the isolation of hydraulic circuits of the system from each other. The pumps drive of the steering system comes both from the engine and from chassis, thus providing the steering response of the truck even if the engine is off.

The electric equipment of the trucks comprises elements and engineering decisions from the leading European manufacturers, such as Hella KG Hueck&Co.. Mekra Land OtomotivYanSan A., SiemensVDOAutomotive, Bosch, Herth+Buss, Doga.

The northern version of the truck is fitted with an insulation container for the accumulator unit with electric heating of electrolyte in the battery. Heating is also provided for the fuel supply system at the fuel intake, fuel filters and the main distribution fuel lines. The electric power necessary for the functioning of the system of heating of accumulator unit and fuel system elements may come both from an outer source, before the start of the engine, and from the car system as the truck drives.

YAROVIT motor vehicles are fitted with the main (operating), secondary, emergency, and parking brake systems ensuring unfailing braking and safe driving. The main brake consists of two separate circuits for the front and rear axles. The design of the drum brakes with pneumatic drive excludes getting dust or water onto the working surfaces of the brakes and ensures a high friction coefficient even at high temperatures. Automatic brake adjuster makes braking more safe. The secondary brake system comprises a jake brake wit a pneumatic drive. Emergency and parking braking involves spring brakes. All trucks are equipped with the antiblock brake system (ABS) ensuring a reliable control over the truck even in difficult weather condition.

Variants of the truck cabs were designed with regards to the various operating conditions of the trucks, and with the aim to provide maximum comfort for the driver. Cabs for YAROVIT motor vehicles are manufactured with the use of the latest engineering approaches based on the combination of metallic frames with glued on fiber-glass panels. There are no metallic elements on the outer surface of the truck cab, which actually deals with the problem of corrosion.

Aftersales commitment

The guaranteed service life of a truck on the whole is 24 months since the date of delivery subject to the truck mileage for the period being no more than 100,000 km

The warranty period for the main blocks and units:

·    engine Cummins ISM 420 30 — 24 months from the date of the truck delivery or after mileage of 160,000 km, whichever comes earlier;

·    engine Deutz TCD 2015 V06 — 24 months from the date of the truck delivery or after mileage of 100,000 km, whichever comes earlier;

·    gearbox ZF 16S221 — 18 months from the date of the truck delivery or after mileage of 100,000 km, whichever comes earlier;

·    axles SISU— 12 months from the date of the truck delivery or after mileage of 80,000 km, whichever comes earlier;

·    steering system ZF Lenksysteme — 24 months from the date of the truck registration or after mileage of 250,000 km, whichever comes earlier.

The system of aftersales servicing and repairs provides for continuous follow-up for each sold truck at the place of its operation for the full period of its warranty. After the end of the warranty period YAROVIT MOTORS offers service in regional support centers. A network of mobile repair shops is planned for the regions with difficult access.

ZAO YAROVIT MOTORS guarantees successful performance of all the sold motor vehicles for the full term of the warranty period. The aftersales commitment covers the vehicle on the whole, including its components with the exception of tires and accumulator units, whose warranties are provided by their own manufacturers.

You have no rights to post comments

Videos

2017joy global

Первая поставка и сборка самосвалов Terex TR100

SANDVIK Mining

Blast hole tamping device WL 36-53

Experience in Braås - Interview with Martin Lundstedt and Martin Weissburg

ЧЕТРА Т40: самый мощный российский бульдозер на тест-драйве

­